Wicked Lights Rekon Pig Saddle Tripod System
The Wicked Lights Rekon Shooting Tripod system utilises the military designed Pig Saddle gun mount, providing an advanced shooting specific rifle rest platform tripod system which is not only extemely solid and stable, but amazingly lightweight and portable, deployable in seconds and fully adaptable to every situation, terrain or rifle system...and unlike adapted photo tripods, the Rekon is DESIGNED for shooting with reinforcements and design features such as proprietary designed reinforcements to critical leg attachment stress areas and leg latch mechanisms
The Wicked Lights Rekon Shooting Tripod type of rifle shooting platform was designed for use by military snipers, but adopted by the shooting sports market for long range precision rifle shooting providing unrivalled situational motion from prone to standing, allowing your rifle to be free standing with 360 degree movement, and precision directional control...weighing only 2.3kg inc tripod, ball head and Pig Saddle.
Made from advanced material components, the Wicked Lights Rekon Pig Saddle gun tripod rest consists of four section precision carbon fibre tripod legs which can be inverted and folded back 180 degrees to 18 inches making it small enough to carry in a back pack or hand held.
USE REKON STANDING...SEATED...or PRONE....
Three leg angle positions provide flexibility and enable shooting in cramped quarters or on irregular surface areas, with Tripod feet equipped with removable rubbers stops that can be replaced to metal spikes which are included.
A precision ball head BH-1 attaches to the Carbon tripod CT-1 and comes complete with a Pig Saddle to allow effective control and mounting of virtually all sporting rifles and tactical platforms, with the ability to remove and release in seconds.
Lightweight but solid using the Pig Saddle
Quickly and effortlessly pan, tilt, cant and adjust your point of aim, on a completely solid, stable shooting platform providing accurate shot placement capabilities.
The Pig Saddle system was developed for the military and is a rigid support rifle attachment method which is attached to the Wicked Rekon ball mount, providing complete versatility, allowing you to quickly and easily attach and detach for every situation and provide 360 degree motion, with a lock facility and full friction control from free movement to lock in a matter of seconds.
Strong, rigid and precise
The Wicked Rekon aluminum to magnesium transition assembly has been strengthed over current shooting tripod systems where traditionally there has been a weakness when using tripods for shooting.
With other brands, when extended with a heavy rifle attached, there typically was movement, but the Wicked Rekon remains solid and precise even at full extension of tripod height thanks to the reinforced magnesium and aluminum risers to mitigate recoil and provide the ability to use heavy calibre rifles.
Pan, Tilt, Cant, Fully controllable, adjustable through 360 degrees, from prone to standing
Four section carbon tripod legs allow for complete flexibility when shooting whether you are 5ft or 7ft and on uneven and rugged terrain.
The central shaft system can be adjusted further in height, but if under 6.5ft in height it can be removed and the ball head mount fixed directly to the tripod, minimizing even more movement with a more than adequate height adjustment range.
Using the Pig Saddle system, the amount of friction of the ball head can be adjusted to allow you to move the rifle to your designed amount of restriction to allow pan, raise and lower, with a lock in position to retain your rifle in a fixed position.
4-Section Tripod Legs
- The tripod legs can be inverted and folded back 180 degrees to 18" making it small enough to carry.
- Three leg angle positions provide flexibility and enable shooting in cramped quarters or on irregular surface areas.
- Tripod feet are equipped with removable rubber stops that can be replaced by metal spikes (spikes are included).
TOTAL WEIGHT including ball head, Pig saddle and tripod: 2.3kg
Specifications(including the ball head):
- Model：CT-1 + BH-1
- Leg Section:4
- Material：Carbon fiber
- Color: Camo
- Folded Height：460mm/18.1inch
- Item Weight：1.84kg/4.05lb
- Loading Weight：16kg/35.27lb
- Max.Tube Diameter：29mm/1.14inchs
BH-1 Ballhead Specifications(only the ballhead):
- Sphere Diameter:36mm
- Horizontal Bead:3
- Item Weight:0.4kg/0.88lb
- Loading Weight:16kg/36.27lb
- Quick Release Plate:38*60mm/1.49*2.36inch
14th April 2020
Brilliant service smooth transaction
13th April 2020
21st March 2020
We Ship With DPD - Providing a world class delivery service, with 1hr notification, and full GPS tracking from our door to yours.
At Scott Country International we ship all stock items with DPD on a UK Next Day Delivery Service.
When your order has been processed we will notify you by email or text (if provided) that your parcel has been shipped.
Once the parcel reaches the DPD depot for forwarding we will then notify you with a 1hr delivery window, providing an estimated delivery time when your parcel will arrive.
What Happens if I am unable to accept delivery at that time?
By following the links on your shipping notification you can select a number of options including; delivery to a neighbour, leave safe, deliver to a DPD pickup shop, deliver on an alternative date.
Non UK Mainland, European and Worldwide Deliveries
Some parts of the UK including Northern Ireland and Highlands and Islands are classed as a two day delivery zone, and the 1hr delivery window may not be available. One of our team is always happy to provide tracking updates if required.
European and Worldwide shipments usually arrive in 3-5 days however please be aware customs clearance may delay delivery of your package.
Due to export control restrictions we are unable to export certain items overseas such as thermal imagers, riflescopes with magnification 9x or greater or featuring electronic processing, and night vision above a certain specification.